Cerner Metrologic MS1690 2D Guía de usuario

METROLOGIC INSTRUMENTS, INC. MS1690 Focus® Series Area Imaging Bar Code Scanner Installation and User's Guide

6 INTRODUCTION Labels Each scanner has a label located on the underside of the head. This label provides the unit’s model number, date of manufac

7INSTALLING THE SCANNER TO THE HOST SYSTEM RS232 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the

8 INSTALLING THE SCANNER TO THE HOST SYSTEM Keyboard Wedge 1. Turn off the host device. 2. Plug the 10-pin RJ45 male end of the PowerLink cable

9INSTALLING THE SCANNER TO THE HOST SYSTEM Stand Alone Keyboard 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink

10 INSTALLING THE SCANNER TO THE HOST SYSTEM RS485S 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the MVC cable into the 10

11INSTALLING THE SCANNER TO THE HOST SYSTEM Integrated USB: Full Speed (- 40 or - 106) Low Speed (- 38) 1. Turn off the host device. 2. Plug t

12 STAND KITS Stand Components, MLPN 46-00147 Figure 11. Stand Components Item Description Qty. a. Stand Base Qty. 1 b. Flexible Shaft Qt

13STAND KITS Hard Mounting the Stand (Optional) Metrologic provides two #8 wood screws for securing the stand base to the counter top. The follow

14 STAND KITS Assembling the Stand Figure 13. Assembling the Stand

15SCANNER OPERATION Two Default Modes of Operation* Multi-Trigger, Out of Stand 1. The IR detects an object in the IR activation range and autom

Copyright © 2008 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted,

16 SCANNER OPERATION Audible Indicators When the MS1690 series scanner is in operation, the scanner provides audible feedback. These sounds indi

17SCANNER OPERATION Visual Indicators The MS1690 series scanner has three LED indicators (yellow, white and blue) located on the top of the scann

18 SCANNER OPERATION Failure Modes Long Razzberry Tone – During Power Up Failed to initialize or configure the scanner. If the scanner does not r

19SCANNER OPERATION MS1690 Depth of Field by Minimum Bar Code Element Width MINIMUM BAR CODE ELEMENT WIDTH 1D PDF A B C D E F G mm .132 .19

20 SCANNER OPERATION MS1691 Depth of Field by Minimum Bar Code Element Width MINIMUM BAR CODE ELEMENT WIDTH 1D Data Matrix A B C D E mm .10

21SCANNER OPERATION MS1690 IR Activation Range The MS1690 scanner has a built in object detection sensor that instantly turns on the scanner when

22 SCANNER OPERATION MS1691 IR Activation Range The MS1691 scanner has a built in object detection sensor that instantly turns on the scanner whe

23TROUBLESHOOTING GUIDE The following guide is for reference purposes only. Contact a Metrologic representative at 1-800-ID-Metro or 1-800-436-387

24 TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The unit powers up, but does not beep when bar code is scanned. The beeper is disable

25TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The bar code may have been printed incorrectly. Check if it is a check digit/character/

iiTABLE OF CONTENTS Introduction Product Overview ... 1 S

26 TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The unit is transmitting each character twice. The configuration is not set correctly.

27DESIGN SPECIFICATIONS MS1690 SERIES DESIGN SPECIFICATIONS OPERATIONAL Light Source: LED 645 nm Pulse Duration: 10 µs to 8000 µs Maximum

28 DESIGN SPECIFICATIONS MS1690 SERIES DESIGN SPECIFICATIONS MECHANICAL Height: 183 mm (7.2") Handle 30 mm (1.2") Width: Head 79

29APPLICATIONS AND PROTOCOLS The model number on each scanner includes the scanner number and factory default communications protocol. SCANNER VER

30 DEFAULT SETTINGS – COMMUNICATION PARAMETERS Many functions of the scanner can be “configured” – that is, enabled or disabled. The scanner is sh

31DEFAULT SETTINGS – COMMUNICATION PARAMETERS PARAMETER DEFAULT RS232 RS485S KBW USB Maxicode 9 9 9 9 Aztec 9 9 9 9 Postals 9 9 9

32 DEFAULT SETTINGS – COMMUNICATION PARAMETERS PARAMETER DEFAULT RS232 RS485S KBW USB Transmit lead zero on UPC-E 9 9 9 9 Transmit UPC-A

33DEFAULT SETTINGS – COMMUNICATION PARAMETERS PARAMETER DEFAULT RS232 RS485S KBW USB XON/XOFF Handshaking 9 ACK/NAK 9 Two Digit Supp

34 CONFIGURATION MODES The MS1690 series has three modes of configuration. • Bar Codes The MS1690 series can be configured by scanning the bar c

35UPGRADING THE FLASH ROM FIRMWARE The MS1690 Focus series is part of Metrologic's line of scanners with flash upgradeable firmware. The upg

iiiTABLE OF CONTENTS Default Settings – Communication Parameters... 30 Configuration Modes ...

36 SCANNER AND CABLE TERMINATIONS Scanner Pinout Connections MS1690-14 or MS1691-14, RS232 Pin Function 1 Ground 2 RS232 Transmit Output 3 RS232

37SCANNER AND CABLE TERMINATIONS Scanner Pinout Connections MS1690-38, Low Speed USB Pin Function 1 Ground 2 RS232 Transmit Output 3 RS232 Recei

38 SCANNER AND CABLE TERMINATIONS Cable Connector Configurations (Host End) “Standard” PowerLink Cable 53-53000-3-FR Coiled Pin Function 1 Shie

39SCANNER AND CABLE TERMINATIONS Cable Connector Configurations (Host End) Keyboard Wedge PowerLink Cable 53-53002-3 Coiled Pin Function 1 Keyboa

40 LIMITED WARRANTY The MS1690 Focus® series scanners are manufactured by Metrologic at its Suzhou, China .The MS1690 series scanners have a five (

41REGULATORY COMPLIANCE Safety ITE Equipment IEC 60950-1, EN 60950-1 LED Class 1 LED Product: IEC 60825-1:1993+A1+A2, EN 60825-1:1994+A1+A2 C

42 REGULATORY COMPLIANCE EMC Emissions FCC Part 15, ICES-003, CISPR 22, EN 55022 Immunity CISPR 24, EN 55024 NOTE: Immunity performance is not

43REGULATORY COMPLIANCE EMC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authori

44 PATENTS For patent information, please refer to www.honeywellaidc.com/patents.

45INDEX A AC ...2, 7–11, 28 Accessories ...2 Adapter...

1INTRODUCTION Product Overview Metrologic's MS1690 Focus® series of high performance hand-held area imaging bar code scanners utilizes hi

46 INDEX Light Levels ...28 Light Source ...27 M Maintenance...

47

NOTES

NOTES

NOTES

July 2008 00-02098G

2 INTRODUCTION Scanner and Accessories BASIC KIT Part # Description MS1690 or MS1691 Area Imaging Bar Code Scanner or Area Imaging HD Bar Co

3INTRODUCTION Scanner and Accessories OPTIONAL ACCESSORIES Part # Description 53-53213x-N-3-FR USB Full Speed Cable, Locking Plus-Power™ Type A,

4 INTRODUCTION Scanner Components Figure 1. Scanner Components Item Description 1 Yellow LED See Visual Indicators (on page 17) 2 White LED

5INTRODUCTION The PowerLink Cable Connecting Important: If the PowerLink cable is not fully ‘latched’ the unit can power intermittently.